CONTACT US

Telephone

01282 878200

Fax

01282 878201

Email

sales@fibet.co.uk

Fibet Rubber Bonding(UK) Ltd

Unit 9 Dale Mill, Hallam Road, Nelson, Lancashire, BB9 8AN.

Bushes

Fully Bonded Bush - FBNA

The FBNA range of bushes are fully bonded, with the rubber compound bonded to both inner and outer sleeves. These are then pre loaded using a special process to accommodate a high resistance of stresses that occur during operation. They are designed to eliminate high frequencies, whilst supporting high loads in all directions. The Bushes are manufactured in a wide range of metric sizes to suit the majority of applications. Alternatively, Fibet are also happy to manufacture Bushes to unique sizes or materials to suit your requirements.

Semi Bonded Bush - FBNS

The FBNS range of bushes are semi bonded, with the rubber compound bonded to the inner sleeve, then the outer sleeve is assembled and pre loaded to accommodate a high resistance of stresses that occur during operation. The FBNS range of Bushes are the largest available on the market – manufactured in metric sizes and loads to suit the majority of potential applications. Alternatively, Fibet are also happy to manufacture Bushes to unique sizes or even materials to suit your requirements.

Flanged Headed Bush - FBF

The FBF range of flanged headed bushes are designed for certain applications where this shape is a pre-requisite for the correct positioning and assembly into the application. They are primarily used within the automotive sector as part of the suspension, although they are versatile enough to be used in a wide range of other applications. Fibet have an excellent metric range of standard FBF Bushes, but are also more than happy to develop and manufacture headed bushes to unique sizes and materials to suit your requirements.

Rubber Bush - FBA

Rubber Bush - FBA

The FBA range of bushes are usually designed to suit each bespoke application – as the number of variables are too high to be satisfied within a standard range of Bushes. The Rubber compound is bonded to the Inner Sleeve, and the outer profile is designed so that it will achieve the desired operating characteristics on the application once pressed into the assembly. These Bushes are primarily designed for automotive applications, and are used in typical installations including suspension, chassis and powertrain elements. However, they can be used for any application, where operation or cost are key determining factors.

Suspension Bush – FBFG/FBFS

Suspension Bush – FBFG/FBFS

The FBFG & FBFS range of bushes are designed to suit each bespoke application – as the number of variants and assembly options are too high to be satisfied by a standard range of Bushes. Fibet can develop these bushes either with the securing mounts as part of the Bush, as in a dog bone type bush ( see picture), or as a simpler bush that would be secured using a through bolt. Either way, Fibet can design the operating characteristics of the Bush to be finely tuned to your requirements in all axes – even if these requirements include a need for Low Torsional stiffness. The bushes can be designed in a variety of materials and compounds to ensure the end result fully complies with your requirements.